+

About Us


Welcome to AD POLES & HIGH MAST

HIGH MAST LIGHTING SYSTEM, STADIUM MAST, SIGNAGE MAST, TELESCOPIC TILTING TYPE MOBILE LIGHTING TOWER CONICAL POLES, OCTAGONAL POLES, SWAGGED TYPE STEEL TUBULAR POLES & DECORATIVE LIGHTING POLE.

COMPANY PROFILE

We proudly introduce ourselves as the indigenous Manufacturer & Supplier of High Masts. We have successfully used our high masts in different fields, such as Street lighting, Oil depot lighting, Stadium lighting, Apron lighting, Port lighting, Telecommunication (cellular network operators) and many other places. We produce Masts ranging from 9 mtrs.To73 mtrs. (All heights) suitable to install light fittings 6/9/12/18/24/32 nos. as per customer's needs. The most important aspect in our product is that it is completely indigenous and with complete Indian technology derived with a n extensive research by a team of specialized engineers & personnel since 2010. The design has been appreciated and approved by different agencies. We have a in house design & drawing facility, which enables us to make a continous research and development. This has lead to certain advantages as compared to other foreign manufacturer in High Mast system with mobile lantern carriage.

WORKSHOP AREA

  • 1. Asbestos Cover Shed - area 28,000 Square ft. at the height of 40 ft. for Manufacturing.
  • 2. Asbestos Cover Shed - area 9,000 Square ft. at the height of 60 ft. for Galvanizing.
  • 3. Asbestos Cover Shed - area 6,000 square ft. at the height of 40 ft. for Bending.
  • 4. Covered Room for Light Fitting manufacture 15 ft. X 30 ft. 450 Square ft
  • 5. Asbestos Cover Shed - area 10,000 square ft. at the height of 40 ft. for Shering

OFFICE AREA

  • 1. AREA:100X20 Ft..
  • 2. AREA : 150 X 10 Ft
  • 3. Cover with Concrete Shed Fitted with Glass.
  • 4. Executive Office 25 Ft. Octagonal Type fitted with glass.
  • 5. OPEN SPACE WITH GARDEN -6.30,000 Sq. Ft.

HIGH MAST

Introduction of High Mast

High mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. The pole that the lighting is mounted on is generally at least 30 metres (98 ft) tall (under this height it is referred to as conventional lighting system), while the lighting consists of a luminaries ring surrounding the pole with one or several independent lighting fixtures mounted around it. Some units have the lighting surrounded by a circular shield to prevent or reduce light pollution or light trespass from affecting neighborhoods adjacent to the highway.
Maintenance of these systems are done by lowering the luminaries ring from the mast head to the base using a winch and motor to the ground or at a height assessable by a Cherry picker and located in areas to allow for easier access without disrupting traffic

Advantagesof High Mast

1.We can provided single longitudinally welded MAST on request.

2.Minimum thickness is not less than 4 mm unlike other foreign manufacturers of 3 mm.

3. Lantern carriage has a 3 point suspension system with perfect balancing.

4. The double drum, winch has an compentiating disc, by virtue of which the tilt of the lantern carriage can be straightened without lowering the carriage ring.

5. pulley system is provided with guide to prevent wire & cable slip off in any position.

6. Torque limiter and limit switch provided for self motor trip off during docking of lantern carriage.

7. Our Mast are Hot Dipped Galvanizing in Single Dip Process up to 14 Mtrs. Long Sections.



Door Opening

An adequate door opening is provided at the base of the mast. The opening is such that it permits clear access to equipments like winch, cable, wire rope, plug & socket etc. And also facilities easy removal of the winch for servicing. The door opening is complete with a close fitting vandal resistant alien key locking with provision for external lock, The door opening is carefully designed and reinforced with adequate steel section so that the mast section at the base is unaffected, and undue bucking of the cut portion is prevented under heavy wind condition.

INTRODUCTION OF OCTAGONAL POLE

Octagonal poles are produced from high grade hot rolled steel coils by an automated procedure of cutting and folding/pressing the trapezoidal sheet into octagonal shape and welding the sides longitudinally by submerged arc welding. Below is the illustration of some standard octagonal poles for street lighting applications complying with SASO specification. Specifications can be catered as per the requirement of clients.

Specification of octagonal pole

Features :

1.*Octagonal Sided tapered steel pole.

2.*Manufactured by press shaping of steel. Plates and welding them longitudinally.

3. * Highly durable.

2.* Available with in-built junction box. Decorated brackets.

Uses

*For Street Lighting

*Used to light highways and main roads

*Area Lighting and Flood Lighting Purpose Manufacturing Process Includes :

Quality

*Octogonal Street Light Pole is duly tested So as to assure their impeccable quality

*Resistant to rust

*Are available in various szies

*Can be availed as per the customer's specifications


Our Client

Get connected with us on social networks:

Loni Road Industrial Area, Site-II, Mohan Nagar, Ghaziabad (U.P.)
Mobile : 9818501127, 8405815215
E-mail : adhighmast@gmail.com info@adpole.net.

Contact

S-31, Loni Road Industrial Area, Site-II, Mohan Nagar, Ghaziabad (U.P.)

adhighmast@gmail.com

1 +91 9818501127

2 +91 8405815215

Google Map